VT Cat Back Exhaust System

This particular exhaust system will replace your stock exhaust system from the axle on back.  In this system you will get the DynoMax VT muffler, the tips and the pipes and together these components will work to increase the flow of exhaust as well as to increase your horse power all while eliminating drone and giving a sound that is throaty and deep. 

Features at a Glance

·         The VT Cat Back system made by DynoMax comes to you complete with both a performance guarantee that is good for 90 days and a limited warranty that is good for a lifetime

·         The mandrel bent pipes are made from 2.75 inch diameter stainless steel

·         The outlet is 3.5 inches in diameter and features a polished and buffed double wall

·         The tips features a slant cut and are made from OAL stainless steel.  They are 10 inches long

·         The stain exterior finish on the muffler is blemish free and created by a Micro Finish technology

·         CRF technology (Continuous Roving Fiberglass) is what is used to absorb any interior resonance

·         The VT muffler has a perforated tube inside of it that is continuous and precision engineered

·         The entire system has been 100% welded in order to provide you with durability that is long lasting

·         The DynoMax VT muffler is made from a type of stainless steel that is called 409

·         The Valve technology that is exclusive to DynoMax delivers a sound and performance that is drone free and always on

·         With the straight through, unrestricted design, the gains in horse power and torque have been dyno proven

This is an axle back exhaust system that includes the VT muffler by DynoMax.  This muffler is the only one in the world that features the Valve Technology that is exclusive to DynoMax.  This technology allows for a high flow and drone free performance.  This includes a sound tuning valve that is precisely calibrated to be inside the muffler itself.  This valve is able to achieve maximum performance simply by opening only within certain ranges of RPM.  When you accelerate, this internal valve will open in order to provide you with an exhaust flow that is enhanced while delivering a sound that is throaty and powerful.  As the pressure in the muffler decreases, it will start to close slowly thereby redirecting the flow of exhaust into a zone in the muffler that is quieter while eliminating any irritating sort of drone in the cab.

The valve spring itself is made from a super alloy that is resistant to both heat and corrosion and will last as long as your rig does.  The mufflers are constructed from stainless steel and are 100% welded.  These are straight through mufflers.  The pipes have been mandrel bent.

 

 

Dynomax: Catalytic Converter Kit

When you are looking for a catalytic converter kit, this one made by Dynomax might be just what you need.  With this catalytic converter kit you will be able to keep your rig running both legal and clean.  This is a 9 quality converter kit.  These are direct fit converters that have been made in such a way that you can simply bolt them on and go.  The body of the converter is constructed from a type of stainless steel that is resistant to rust.  With this being a direct fit part, all of the factory flanges and hangers are included in order to make the installation process one that is both easy and quick.

This catalytic converter kit does comply with all EPA policies.  All of the Dynomax catalytic converter kits come with a warranty that is goof for 50,000 miles or 5 years from the date it was installed.

Features at a Glance

·         This catalytic converter kit made by Dynomax is meant for use on the Jeep CJ from 1981 – 1986 or the YJ Wrangler from 1987 - 1990

·         This catalytic converter kit is street legal in 49 states

·         You will not find any legal sales of this catalytic converter kit being made in California

·         This catalytic converter kit made by Dynomax comes to you complete with a warranty that is good for 50,000 miles or 5 years

·         All of the hangers and the flanges are included with this kit

·         All of the clamps are included with this kit

·         This kit is meant for use with a 4.2 L engine that has 6 cylinders and an air tap

·         The included exhaust clamp is 2 1/8 inches

Please Note

·         This catalytic converter kit is not street legal in the state of California.  However it is legal for use in racing in California

·         There is also an air kit that must be used in conjunction with this catalytic converter kit made by Dynomax.  It is the air tube kit.

Now, for those who are unclear on what exactly it is that the catalytic converter is good for:

The catalytic converter works as a part of your Jeep’s exhaust system.  The exhaust gases that come from the engine have harmful components.  The function of the catalytic converter is to transform those harmful things into harmless ones before releasing them to the muffler and then out into the air.  The catalytic converter has catalysts inside it that change these harmful contaminants into ones that are harmless. 

If your catalytic converter becomes poisoned or clogged then you will need to replace it.  Additionally, the catalytic converter can fail due to faulty exhaust valves coming from the engine or from the converter being overheated due to bad plugs that cause the unburned fuel to heat.

 

DynoMax Stainless Steel Exhaust System

There are quite a few exhaust systems made by DynoMax that are constructed from stainless steel.  If you don’t find what you are looking for here, please head over to their site for a complete listing of them.

Cat Back Race Series Bullet Exhaust System

This is a cat back system that includes the Race Series bullet muffler along with all of the necessary tips, clamps and pipes.  The construction is 100% welded and the design is straight through and unrestricted in order to give you an increase in power that has been dyno proven.  For those looking for that deep race tone and the ultimate in terms of performance, this is the system you need.

Features at a Glance

·         This system comes to you complete with a Safe and Sound guarantee that is good for 90 days as well as a lifetime warranty

·         Stainless steel pipes are 3 inches in diameter and mandrel bent

·         Tips are stainless steel and feature a slant cut.  They are 9 inches in length, buffed and polished, features a double wall and have an outlet that is 4 inches in diameter

·         This exhaust system was designed specifically for those who are short on space

·         The sound is reduced while not impeding the performance because of the CRF technology (Continuous Roving Fiberglass) utilized

·         Design is both compact and lightweight

·         Muffler is made from 409 stainless steel

·         Long lasting durability is achieved by the design being 100% welded

·         The stainless steel welded muffler provides a sound that is deep and race inspired

·         Get a track tested increase for your torque and horsepower with this straight through, unrestricted design

This particular system features the Race Series Bullet muffler that has been dyno tested.  The design is one that is straight through and as such is unrestricted.  This enables it to deliver the maximum amount of power.  Included in the system you will find the clamps, slant cut tips. Stainless steel pipes and of course the muffler itself.  The pipes have been mandrel bent and constructed in such a way that any serrations have been eliminated to ensure that you get a flow of the exhaust gases that is both smooth and high.  The mufflers in this kit will give your Jeep a tone that is powerful, loud and deep.  Because this system is designed to be lightweight and compact, it is perfect for Jeeps that have only a limited amount of space.

The muffler in this kit is a performance one and utilizes the CRF technology that is able to provide a sound reduction of up to 4 dbA while it still maintains a tone that is deep and has been racing inspired.  This particular system includes a 90 guarantee as well as a lifetime warranty.

DynoMax Exhaust Cat Back Exhaust System

DynoMax makes quite a few different cat back exhaust systems.  All of them are outstanding and it was difficult to choose just one to write about today.  If you would like to see more of the cat back exhaust systems made by DynoMax Exhaust they have all of them on display right on their web site.

DynoMax Race Series Cat Back Exhaust System

This particular system comes with the Race Series Bullet muffler that features a construction that is 100% welded and has a straight through design that gives you an increase in power that has been dyno proven.  It also comes with the necessary clamps, tips and pipes.  For those drivers looking for a deep race tone and the ultimate in performance, this system is the ideal choice.

Features at a Glance

·         Comes with both a Safe & Sound Guarantee for 90 days and a lifetime warranty

·         Mandrel bent pipes are 3 inches and stainless steel

·         Outlet is 4 inches, double walled and has been buffed and polished.  Slant cut tips are 9 inches and made from OAL stainless steel

·         This exhaust system was made specifically for people who drive vehicles with a limited amount of space

·         The technology used is called CRF (Continuous Roving Fiberglass).  This particular technology reduces the amount of sound that is produced while leaving the performance uninhibited.

·         The overall design of this system is compact and lightweight

·         Muffler is made from 409 stainless steel

·         Design is 100% welded to give you durability that is long lasting

·         You get a deep race sound from the stainless steel welded muffler known as the Race Bullet

·         Straight through design is unrestricted to give you track tested and dyno proven gains in torque and horsepower

Featured in this system is the Race Bullet style muffler.  This muffler has been dyno tested.  It has a flow that is straight through and unrestricted.  It delivers the maximum amount of power.  Also included are the clamps, the slant cut tips and the stainless steel pipes.  These pipes are mandrel bent and have been made in such a way that serrations are eliminated and as such a smooth, high flow of exhaust gases is ensured.  The mufflers in the Race Bullet series give your Jeep a tone that is loud, deep and powerful.  The entire system is designed to be lightweight and compact so that it is ideal for Jeeps and other vehicles with a limited amount of space.

The muffler uses a technology known as CRF which gives a sound reduction of up to 4 dbA for many applications while still maintaining a tone that is racing inspired and deep.  The construction of the muffler is 100% welded and this ensures that it has the maximum durability.